WS Silica Alumina Gel

WS Silica Alumina Gel

1. Combines the high specific surface area of silica gel with the surface polarity of alumina;
2. Can be dispersed in water without hydrolysis or fragmentation, particularly applicable to water-phase adsorption systems;
3. Typically used in PSA air pre-purification, air separation units, compressed air drying, and etc.
Send Inquiry
Description
Technical Parameters

Henan Sinmat Chemical Co., Ltd. is one of the most reliable manufacturers and suppliers of ws silica alumina gel in China. With abundant experience, we warmly welcome you to buy high quality ws silica alumina gel for sale here from our factory. Contact us for free sample.

 

Introduction

 

WS type silica alumina gel also known as silica alumina oxide gel WS or silica gel WS, is a special-purpose adsorbent material which combines the high specific surface area of silica gel with the surface polarity of alumina, but emphasizes a comprehensive balance of adsorption capacity and adsorption strength.

 

WS usually stands for Water Stable, Water Susceptible or Water Suspensible, meaning that the WS type silica gel can be dispersed in water without hydrolysis or fragmentation, and it is particularly applicable to water-phase adsorption systems. WS silica alumina gel can maintain particle integrity even when exposed to liquid water or high humidity air for extended periods. So silica gel H can also be considered as water resistant silica gel or water-proof silica gel.

 

Type WS silica gel possesses high adsorption capacity, good thermal stability, moderate pore structure, strong polar sites, and excellent adsorption performance for both polar and weakly polar molecules. Its adsorption capacity under high humidity conditions is far superior to that of type A, type B and type C silica gels. Therefore, typical applications of silica gel WS include PSA air pre-purification, air separation units, compressed air drying, and etc.

silica alumina oxide gel WS
silicon aluminum gel WS
silica gel WS

 

Technical Specification

 

Type

Silica Alumina Gel WS

Chemical Formula

mSiO2 . nAl2O3 . xH2O

Apprearance

White beads

Diameter(mm)

1-3, 2-4, 2-5, 3-5

SiO2(%)

82-88

Al2O3(%)

12-18

Adsorption Capacity(25℃, %wt)

RH10%

≥4.0

RH20%

≥7.0

RH40%

≥15.0

RH60%

≥25.0

RH80%

≥35.0

Bulk Density(g/ml)

≥0.65

Crush Strength(N)

≥100

Surface Area(m2/g)

450-550

Pore Volume(cm3/g)

0.4-0.6

Wear Ratio(%)

≤0.1

Water Content(%)

≤3.0

 

Application

 

  • PSA Air Pre-purification
  • Air Separation Units
  • Compressed Air Drying

 

 

Hot Tags: ws silica alumina gel, silica alumina gel type WS, silica alumina oxide gel WS, silica gel WS, silica gel type WS, silicon aluminum gel WS, China ws silica alumina gel manufacturers, suppliers

Send Inquiry
Send Inquiry